Definition It is ready-to-use gypsum plaster whose setting and processing times have been lengthened and heat and sound insulation characteristics have been increased, and applied by spraying with a machine. Area of Application -Can be applied on surface kinds such as bricks, briquettes, gas concrete, concrete and exposed concrete easily. Application Features -Using period: 90 minutes -Application thickness: min. 1 mm, max. 2 mm -Setting Time: min. 20 minutes -An inflammable construction material. -Never allows bacterial or fungi growth. -It fills in spaces and roughness on the surface. -It provides a surface on which any paint or decorative coating can be applied, by making it a satin-like smooth surface. -It provides a smooth and hard surface thanks to its special granulation. Surface Preparation -The application surfaces must be cleared of dust, dirt, oil, etc. that prevent adherence. Application Conditions -Ambient temperature should be between +5°C and +35°C -Do not apply on frozen, melting surfaces, or surfaces likely to freeze within 24 hours. -Do not apply on surfaces under direct sun or strong wind, or hot surfaces. -The surface must be finished applying the Satin Finish Plaster immediately after the under- surface operations have been completed. -The newly applied surfaces must be protected against water contact definitely. Warnings and Advices -Pay attention to the water/plaster ratio of the mix. Otherwise, it may cause spalling, cracks or strength reduction.
Definition
It is ready-to-use gypsum plaster whose setting and processing times have been lengthened and heat and sound insulation characteristics have been increased, and applied by spraying with a machine.
Area of Application
-Can be applied on surface kinds such as bricks, briquettes, gas concrete, concrete and exposed concrete easily.
Application Features
-Using period: 90 minutes
-Application thickness: min. 1 mm, max. 2 mm -Setting Time: min. 20 minutes
-An inflammable construction material. -Never allows bacterial or fungi growth.
-It fills in spaces and roughness on the surface.
-It provides a surface on which any paint or decorative coating can be applied, by making it a satin-like smooth surface.
-It provides a smooth and hard surface thanks to its special granulation.
Surface Preparation
-The application surfaces must be cleared of dust, dirt, oil, etc. that prevent adherence. Application Conditions
-Ambient temperature should be between +5°C and +35°C
-Do not apply on frozen, melting surfaces, or surfaces likely to freeze within 24 hours.
-Do not apply on surfaces under direct sun or strong wind, or hot surfaces.
-The surface must be finished applying the Satin Finish Plaster immediately after the under- surface operations have been completed.
-The newly applied surfaces must be protected against water contact definitely. Warnings and Advices
-Pay attention to the water/plaster ratio of the mix. Otherwise, it may cause spalling, cracks or strength reduction.
-Do not apply in very hot, dry or windy environments. If applied in very hot
environment, it may cause spalling, cracks and strength reduction consequently.
-Pay attention to the product storing conditions. Do not keep the product in humid or very hot places.
-In case any petrification is found out in the bag, do not use the product.
-Do not breathe its powder since it consists of various chemical additives and plaster. Avoid contact with skin and eyes. In case of contact, wash your skin/eyes with plenty of water. Use protective equipment such as mask, gloves etc. during the works.
Application Tools
Hand mixer, plastering trowel, floating rule, steel trowel
Application
1. The container in which the mortar will be prepared must be clean and cleared of the
remnants of the previous mixture.
2. It is necessary to pay attention to cleanliness of the water and materials used.
3. The water used in the mixture should not be salty, acidic or oily. The water
temperature must be between 17 and 23°C.
4. The mortar must be prepared by using 6.75-7.25 liters of water and 10 kg of BGC
Gypsum Satin Finish Plaster.
5. Water is poured into the container, and then BGC Gypsum Satin Finish Plaster is
added. The plaster is given 2-3 minutes to absorb the water.
6. The plaster is mixed until a homogeneous consistency is achieved by mixing with a
trowel or hand mixer.
7. If you are using a mechanical mixer, it must be used at a low speed.
8. No water or plaster should be added into the mortar during or after mixing to prevent
lump formation.
9. Pay attention to cleanliness of materials to be used in application.
10. Do not mix any other product or materials into BGC Gypsum Satin Finish Plaster.
11. The mortar ready for the application is applied by pressing on the surface by a clean
trowel.
12. The marks are removed by the edge of the steel trowel after the plaster begins to set.
13. After the plaster has dried, it is sandpapered.
14. The application thickness must remain between 1 mm and 2 mm.
Storage Conditions
Bags must be stored in a dry place and to a height that does not exceed 18 bags. Bags must be stored so as not to contact with the ground in order them to be protected against humid. BGC Gypsum Machine Plaster stored as described above must be used within 12 months as of the production date. Inappropriate storage or exceeding the expiry date may deteriorate the properties of the product.
